Showing posts with label Balloon Frames. Show all posts
Showing posts with label Balloon Frames. Show all posts

Wednesday, October 20, 2021

It's All About the Framework

I am always in awe of the incredible balloon sculptures and those who build them. I have to confess, this style of balloon design is definitely not something that is within my skill level. There is a great deal of detail in the planning and preparation.

Something that I was told very early on in my ballooning career is that a balloon sculpture is only as good as the frame that it is built on, and I could not agree more! 


At the recent Moscow Balloon Festival, the Qualatex sponsored team, Alexander Solomatin, Vadim Shushkanov, Dmitry Novikov, Vadim Nesterenko with other fabulous artists created this incredible Gorilla sculpture! I have always loved the work of Alexander Solomatin, Vadim Shushkanov and Dmitry Novikov. Every sculpture that they have ever created has been outstanding, but for me, this has to be one of their very best! 

When I first saw this sculpture, I was as impressed with the framework as I was with the end result! 


As I stated at the start of this post, it's all about the framework, so today, I would like to talk a little bit about frames and what you will need to make them.

As with any design, you will first need to determine what you are going to make. This could be something specific for a client or it might be your opportunity to build a sculpture for a competition.

You first need to determine how your sculpture is going to be supported. For example will it be suspended or freestanding? Taking all aspects of the job into account will help determine how ridged the framework needs to be.

The three basic framework materials that are used by balloon specialists are PVC pipe, EMT (or conduit); and aluminium rod. Looking at the framework below, the majority of the frame is made from different thicknesses of aluminium rod, with thicker rods for the main structure and thinner rods for the detail on the face and arms. Once the frame structure is made, it is carefully wrapped in a strong netting or sometimes chicken wire, which is how the balloons are attached.




PVC PIPE

PVC pipe is the white plastic pipe commonly used for plumbing and drainage, and is readily available from home-improvement stores. PVC stands for polyvinyl chloride. PVC has an extremely durable nature, and is lightweight, making it an appealing material when constructing sculpture frames. It comes in many different sizes, but the most commonly used in the balloon industry is the 1/2" - 3/4" piping as you can easily add balloon clusters and it is also easy to cut and bend. PVC piping can be used to create arches and circles, and when heated you can create right angle bends and curves within the piping.

EMT/CONDUIT

EMT, also called conduit, is tubing used by the electrical trade to encase electrical wires. It is readily available for purchase from hardware and home-improvement stores.
Like PVC, conduit comes in many sizes from 1/2" to 1" and in a variety of different lengths. 
EMT can be bent using a pipe bender tool, these are also available from hardware stores. Conduit can be cut with a hacksaw, but the preferred method is to use a pipe cutter.

ALUMINIUM ROD

Aluminium rod and bar is produced by several different processes namely extrusion, rolling and coiling, or drawn directly from molten aluminium. Aluminium wire is used primarily in electrical transmission applications due to its superior conductivity and non-corrosive nature. Though aluminium rod is generally not available from hardware or home-improvement stores, some balloon wholesalers also sell it and it is also available from metal suppliers.
The most common sizes of aluminium rod used by balloon artists are 3/16" (4.76mm) , 1/4" (6.35mm) and 5/16" (7.93mm), however, there are many sizes available. The thicker the rod, the more difficult it is to bend.
The best way to cut aluminium rod is with bolt cutters. Investing in a good pair will help you to save time and energy! 
The easiest way to bend aluminium rod is to place a 4" - 6" length of EMT over the rod when bending to give you leverage. Make sure to keep the rod flat when bending it so that the frame does not warp. With lots of small bends, patience, and practice, you will create some great looking frames! 
Duct tape is the best method for securing aluminium rod frames. When taping two parallel pieces of rod together, overlap them by at least 4" - 6". If you are taping two perpendicular pieces of rod together, male and "L" shape first, then tape both ends securely. Duct tape can also be used to cover the sharp ends of the rod and EMT too.

BASES

To support your framework construction, you will need heavy bases. These are not so easy to buy off the shelf these days, so you may need to look into having some made for you. Steel base plates are the best, especially for outdoor work. Wooden bases, though not as heavy as steel can be weighted down by adding additional weights. 




When I visit events such as the Moscow Balloon Festival, the World Balloon Convention and other ballooning events, I love to watch the sculptures being made. 

Who cannot be spell-bound by those riveting eye's in the picture above! And for anyone who loves Fantasy Flowers, those leaves are made from 3ft balloons stretched on an aluminium rod... I tried this once without much success.







The Team!
Alexander Solomatin, Vadim Shushkanov, Dmitry Novikov, Vadim Nesterenko, 

I know that the Russian team loves to compete, and I asked Vadim to explain why?

"For me, there are two of the most important benefits of balloon contests. First of all, every competition is a great opportunity to create a sculpture you hardly ever make in different circumstances. Almost all of the balloon competitions in the world relate to art, not business. There are no customers with their wishes and requests, you don't need to think if somebody can buy your work, you're completely free to share your thoughts and ideas through balloons. Isn't it the best option to feel like a true balloon artist?

And secondly, each competition makes you improve your professional skills. If you would like to build an impressive sculpture, you have to solve a lot of problems. You need to search and try many colour combinations, balloon technics, methods and materials for frames or create something completely new. This sort of experience always rises your professional level and gives a huge background for using in everyday work."

I hope that you find this sculpture as incredible as I do! If working on a large sculpture like this is something that appeals to you, I recommend that you attend a balloon event/convention that has a large sculpture competition and sign up as a helper. It will be one of your best experiences ever, and who knows, it may lead you to entering  your own sculpture one day! 

Happy Ballooning! 

Sue

www.suebowler.com

Follow me @suebowler